// CANADIAN MILITARY AIRWORTHINESS IN 30 DAYS
AIRWORTHY//30 is an independent professional-development course covering the CAF Technical Airworthiness Program, the Technical Airworthiness Manual (TAM), type design approval, design standards, continuing airworthiness, and foreign military type designs in Canada. Learn in short daily lessons across five modules.
// SECTION 02 — THE DAILY PROTOCOL
Every lesson unlocks at 06:00 your local time and lands in your inbox as a BLUF briefing with a deep link. Open, run the protocol, close the day. The docket advances itself — you just fly the profile.
Two flashcard and scenario prompts drawn from material taught 2–5 days ago — surfaced precisely where the forgetting curve says you'll need them.
BLUF summary, regulation excerpts, comparison tables, and real certification case studies — the document, engineered for a working engineer's attention span.
Three scenario questions with real-time evaluation and Means-of-Compliance mapping. The course uses an 80% pass threshold.
// SECTION 03 — SYLLABUS
MODULE M2 · DAYS 06-12
The heart of the course. The DND Type Certificate, Type Design Examination, certification-basis construction, and the procedural machinery every CAF certification program runs on.
The CAF lifecycle: TC, TDE, airworthiness clearances, and Release to Service.
Assessment of Acceptability and Assessment of Applicability - credit toward a DND Type Certificate, not itself an approval.
Recognized code and/or OCA basic-vehicle basis, military additions, and special conditions.
Analysis, test, inspection, demonstration, similarity - compliance showing under AETE engineering flight test.
CC-177 off the shelf, CH-147F modified via TDE, CH-148 developmental - and the F-35A with no civil TC.
Military modifications, contractor certification, and configuration control.
Full case study: rebuild the certification basis and defend the compliance matrix for a fleet modification gone sideways.
// SECTION 04 — PLATFORM
Each day's lesson unlocks at 06:00 your local time. An email lands with a BLUF summary and a deep link — open, learn, done before your first coffee.
Every morning re-opens with two targeted prompts from 2–5 days back — the forgetting curve, countered by design.
Assessments map every answer to its Means of Compliance — MC1 through MC6 — so you think like the TAA project officer across the table.
Pass the Day-30 final and receive a private certificate of course completion with a unique verification ID and QR code, validated publicly at /verify.
Certificate of Completion
AW30-7X2K-9Q4M
SAMPLE
CASE FILE — DAY 12 PRACTICAL
"The contractor called it a minor design change. The Type Design Examination said otherwise."
On Day 12 you inherit a mock program: a DND-unique avionics change to a foreign military type design, claimed as covered by the original Type Design Examination. The certification basis was never re-established for the DND-unique changes — and the compliance matrix has a hole exactly where the system safety assessment should be.
Working from the TAM's own certification-basis rules, you rebuild the basis under a recognized military code, classify the design change, and defend a Means of Compliance for every affected clause — the same exercise a TAA project officer runs when a fleet program goes sideways.
// SECTION 05 — COURSE COMPLETION
Completion is documented with a private certificate of course completion, a verification ID, and a QR code that resolves to a public record at /verify. Anyone can confirm the course record in seconds without an account.
SAMPLE CERTIFICATE — FICTIONAL LEARNER
This confirms that
EXAMPLE LEARNER
has completed AIRWORTHY//30 — Canadian Military Airworthiness in 30 Days — and passed the cumulative final examination at 80% or better.
Verification ID
AW30-7X2K-9Q4M
SAMPLE RECORD — NO CREDENTIAL ISSUED
Independent course record · Not a government-issued credential
// COURSE QUESTIONS
AIRWORTHY//30 is an independent, 30-day professional-development course about Canadian military airworthiness. Five modules cover the Canadian framework, type design approval, design standards, continuing airworthiness and foreign military type designs.
The course is designed for professionals and learners who want to understand Canadian military aviation engineering, maintenance and project decisions. Choose plain-language Understanding and Application lessons or the more detailed Technical and Regulatory Practice path. Both paths share the course assessments and completion record.
Plan approximately 15–20 minutes for a daily lesson, with a refresher, a core explanation and scenario questions. The curriculum spans 30 days. Optional supplemental learning is separate from the core course, exam and certificate requirements.
No. AIRWORTHY//30 is independent and is not affiliated with, endorsed by or approved by the Government of Canada, DND, the CAF or an airworthiness authority. Its certificate records course completion and does not grant a licence, accreditation, delegation, authorization or regulatory qualification.
The TAM contains the rules, standards and advisory material for the DND/CAF Technical Airworthiness Program. Its companion, the Airworthiness Design Standards Manual, addresses aeronautical design standards and their application. Read the official TAM overview and official ADSM overview.
No. The lessons support education and professional development. Always use current official publications, your actual authority and your organization’s approved procedures for engineering, maintenance, certification and operational decisions. Read our independence and credential notice.
Explore the full 30-day curriculum or follow the official Canadian military airworthiness references.
Your docket opens tomorrow at 06:00 local.
Self-Paced · Daily Unlocks · Certificate of Completion